|
The Animatronic Mouth Kit gives you all the parts to
reproduce a natural human mouth movement.
Up and down movement is controlled with a micro servo
included with hardware.
Great for beginners and advanced designers a must for
any animatronic builder.
Kit includes:
Micro R/C Servo
Servo mounting bracket, support and hardware
Upper and lower mouth parts with mounting hardware
Tongue part / with gag wire
Servo linkage hardware / parts
Instructions / application overview
"In Stock" $89.95 ea
The Animatronic Eye Kit gives you all the parts to
reproduce a natural human eye movement.
Left & Right movement is controlled with a micro servo
included with hardware.
Great for beginners and advanced designers a must for
any animatronic builder.
Kit includes:
Micro R/C Servo
Servo mounting bracket, support and hardware
Eye movement bracket with mounting hardware
2 - 24mm 1/2 ball realistic human eyes (colors
may very)
Servo linkage hardware / parts
Instructions / application overview
"In Stock" $69.95 ea
The Animatronic Eye Kit gives you all the parts to
reproduce a natural human eye movement.
Left & Right movement is controlled with a micro servo
included with hardware.
Great for beginners and advanced designers a must for
any animatronic builder.
Kit includes:
Micro R/C Servo
Servo mounting bracket, support and hardware
Eye movement bracket with mounting hardware
2 - 24mm 1/2 ball realistic human eyes (colors
may very)
Servo linkage hardware / parts
Instructions / application overview
Puppeteer Controller
(Puppet-II Board)
Small controller for single servo control with up to
4 minutes recording time, loop playback with variable time delay between
loops, auto start-up and easy recording features. Several modules may be daisy
chained together and controlled from one master module.
The Puppet Controller has an additional digital channel with a 1A @ 24 Vdc rated
relay.
Record your servo channel first and then superimpose the digital channel whilst
the servo is playing
The Puppet servo controller includes the following features:
- Single channel servo control
- Programmable Servo , Relay Recording time - 4 Minutes
- Full 180 degree rotation pulse train (for servos that can physically rotate
180 degrees)
- Looping play with adjustable time delay between loops Record edit function
- Synchronization pulse for multiple unit operation
Board Size: 2-3/4" L x 1-1/3" W
Controller has 7-bit Resolution.
Power Requirements: 5Vdc @ 1 Amp
Assembled and Tested
( 5 Volt dc power supply included )
"In Stock"
$169.95 ea
The Animatronic Plastic Eye Kit gives you a natural
human eye look.
Great for beginners and advanced designers a must for
any animatronic builder.
Kit includes:
Pair 24mm plastic half domes
eyes
Instructions / application overview
$24.99 ea
(Pair)
The Animatronic Plastic Eye Kit gives you a natural
human eye look.
Great for beginners and advanced designers a must for
any animatronic builder.
Kit includes:
Pair 24mm plastic half domes
eyes
Instructions / application overview
$15.99 ea
(Pair)
DX6i 6-Channel Full Range w/o Servos MD2
Overview
The 6-channel DX6i uses the same full-range DSM2™ technology found in the
Spektrum DX7 and includes an impressive list of programming features for both
airplanes and helicopters that are simple to access and use. It comes with the
new AR6200 DSM2 6-channel receiver that is robust enough to use in large models
yet compact enough to fit in many parkflyers. The DX6i is also compatible with
all existing Spektrum aircraft receivers. Whatever kind of flying you do, the
DX6i can be adapted to most any model in your existing collection that requires
6-channels or less.
Key Features
 | Full range 2.4GHz DSM2 6-channel radio |
| 10-model memory |
| Model Match |
| ServoSync |
| Roller/selector user interface |
| Attractive and ergonomic design |
| Proven DSM2 technology |
| Rudder dual-rate |
| Large LCD display |
| Integrated timer |
| Contrast Adjustment |
| Dual-speed trim scroll |
| Model name and type |
| Throttle cut |
| Trainer Mode |
| Model Copy |
| Travel adjustment |
| Sub-trim |
| Servo monitor |
| Dual rate and exponential |
| Compatible with any existing DSM and DSM2 receivers
|
| Airplane Programming Features: Flaps, P-mixes, Dual
aileron, V-tail, Delta, Differential |
| Heli Programming Features: Gyro adjust, Graphic
throttle curve, Graphic pitch curve, P-mixes, Revo mix, Swash type (Normal,
and CCPM 120) |
| Adjustable stick length |
| Direct trim access display |
$189.95 ea + S/H
BR6000 DSM DuaLink 6-Channel Bot Receiver
Overview
Spektrum is happy to announce a specially-programmed receiver specifically for
robots and battle bots. This is ideal for applications where it’s necessary to
shut down systems (ie. weaponry, drive motors, etc,) during loss of signal to
prevent an unsafe condition.
If you currently own a DX6 radio and are using it in a robot application, you’ll
want the new BR6000 receiver.
Key Features
Unique programming specifically for bot applications
Failsafe allows you to preprogram positions to shut down systems in case of
signal loss
DuaLink™ (pat pending) incorporates two receivers in one
Ultralight 7 grams
Compact design 39 x 39 x 9mm
$59.95 ea + S/H
Auto Talk Kit
Kit includes:
Standard R/C servo jaw motion unit.
Auto Talk E motion control unit.
Auto Talker controller instruction manual.
Circuit Board Only
$ 99.00 ea+S/H
Wizard - 5 Board:
|
Wizard - 5 Board:
The Wizard - 5 Board will record and playback up to 5 minutes of
action for up to 2 servos and 2 digital outputs. It also incorporates a 4
-minute audio recording and playback sound chip with the ability to control
one servo channel either from recorded moves or from an audio signal, direct
or from on-board sound chip.
The card includes features such as looping action with variable delay
between loops, auto start-up on power up and a connection interface for a
PIR, remote switch or pressure pad to initiate playback.
Recording sessions are built up on a track-by-track basis- no programming is
required. During recording, all previously recorded tracks are re-played to
aid synchronization.
Wizard - V Board Features
2- Digital channels- either 0/5V @ 10mA outputs or relay rated 30V @ 2A
.
2- Servo channels one channel may be automatically controlled from an
audio signal either from the line input or from the on-board sound chip.
4- minute high quality sound chip- digital recording selected from either
from the line input (ie from a sound card and wav files) or from the
on-board electret microphone.
Potentiometer to adjust the servo position and the time delay between loops
in loop-play.
Digital ON-OFF, NEXT, PLAY and RECORD buttons.
Record enable/disable jumper, EEprom protect jumper.
AUTO-PLAY and LOOP-PLAY switches.
Sync output for multi-board operation.
Remote start option- for switches, sensors / PIRs, etc.
Maximum and minimum set points to the audio servo channel, and many more
features.
Power supply, Servos, not included.
( 9 Volt dc @ 2 Amp power supply needed )
Cost $ Call +S/H |
This handbook is designed to introduce various basic
applications found in Animatronics. The book covers simple servo design, sound,
lighting, mechanical concepts, basic pneumatic applications and some simple
electronic principles such as LED's setup for lighting effects. There are many
pages that show applications on how to set up controllers, hardware and parts
for a specific application.
Information is shown in an easy to follow graphic format with many pictures and
drawings showing how to.
$35.00 ea + 5.00
US Shipping
Affordable Animatronics Volume Two, introduce users to
building animatronic characters. The book covers how to take several common
puppets, toys and everyday off the shelf items found in most hardware and hobby
stores and combine them with Blue Point Engineering electronics to building
animatronics with motion, sound and lighting effects.
$45.00 ea + 5.00 US Shipping
This Heavy Duty Servo Y harness
Compatible with Hitec S, JR and Airtronics Z servos. It
has gold plated servo plugs for better transfer of signal. The three Y harness
20 gauge servo wire colors are black, red, and yellow. Available in 6" lengths.
$7.50 ea + 5.00 US Shipping
Receiver Battery Charge Cord & Plug
Assembly
No charge, no go! Hitec Receiver Battery charge cord and plug assembly.Two
wires, red and black.
Length: 59"
$5.00 ea + 5.00 US Shipping
Hitec NiMH Battery Pack, 750mAh
This is the Hitec NiMH 4.8V RX Battery Pack with 22-gauge lead wires and a
universal connector. Lime green shrink wrap. AE sized cells.
Size: 2-1/4"x1-1/8"x1/2"
Voltage: 4.8V
Capacity: 750mAh
Connector: Hitec "S"
$18.50 ea + 5.00 US Shipping
(NOTE) All
animatronics units and special effects controllers are special order only. 3-6
weeks for special order products. Call and check for stock 650-568-3400.
HOW TO ORDER
Send check or money order to
VoodooFx
3312 Hoover Street
Redwood City, Ca 94063
Or
call 1-650-568-3400 to place order
We accept all major credit cards through Pay Pal
Services.
Shipping & Handling
: 2007
All international orders must
provide a confirmed address through Pay Pal or provide insurance for the value
of product being sent. Orders not meeting these terms will be subject to be held
until order is confirmed. Please email us for a international price quote.
No shipping on Fridays or Saturday.
Shipping can range from $5.00-$30.00 or more in the U.S., depending on size
and complexity.
Please
email for an
international quote. NOTE: Customer pays for all
ship fees coming or going on any model, prop or lighting kits.
Shipping fees are not included on sale prices, sales tax applies to California
residents.
Please check this page regularly
for updates.
| 
